Magnum V8-5.7L VIN 2 (2007)
Seat Position Sensor: Service and Repair
Installation
INSTALLATION
1. Position the seat track position sensor (3) on the end of the bracket (1) located on the lower outboard seat track (5).
2. Push the sensor firmly into the bracket until the snap feature (2) locks into place.
3. Connect the electrical connector (4) to the sensor.
WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.
WARNING: Following successful completion of the Airbag System test procedure, the Occupant Classification System Verification Test
must be done using a scan tool and the appropriate diagnostic information.
