dodge Workshop Repair Guides

Dodge Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Ignition Switch Lock Cylinder: Service and Repair
Removal

REMOVAL

1. Disconnect the negative battery cable.

2. Remove bezel ignition switch ring.

3. Pull center console bezel loose from instrument panel .

4. Insert ignition key and turn to the "ON" position.

5. Depress the locking tab on the ignition switch housing .

6. Pull the key cylinder from the ignition switch housing .

Starting and Charging > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair > Removal

< PREV PAGE NEXT PAGE >