Magnum V8-5.7L VIN 2 (2007)
Headlamp Washer Hose: Service and Repair
Removal
REMOVAL
The headlamp washer hose (2) is a special high pressure hose with specific fittings (3), and must be replaced as a unit.
1. Disconnect and isolate the battery negative cable.
2. Loosen up the fascia (1) on the side of the vehicle in which hose needs replacing.
3. When disconnecting hose (2) , press down firmly on latch (3) at headlamp washer pump motor and washer assembly and pull apart.
