Magnum V8-5.7L VIN H (2005)
4. Install the air inlet housing onto the HVAC housing.
HVAC Housing
DISASSEMBLY
NOTE: The HVAC housing must be removed from the vehicle and disassembled for service of the A/C evaporator.
1. Remove the HVAC housing assembly and place it on a workbench.
2. Remove the air distribution housing (3) from the HVAC housing (1).
3. Remove the air inlet housing (2) from the HVAC housing.
4. Remove the two screws (1) that secure the flange (2) to the front of the HVAC housing (3).
5. Remove the flange and the heater core tubes (4) from the HVAC housing.