Magnum V8-5.7L VIN H (2005)
1.
Install a tie strap, pin 04856500 or equivalent, to secure the MAP sensor wiring to the purge solenoid vacuum line and away from the wiper
linkage (Fig. 1).
NOTE:
Do not position the tie strap and wiring so that there is a strain on the wires going into the back of the MAP insulator/connector.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.