Magnum V8-5.7L VIN H (2005)
11. Tighten lower shock clevis bracket bolt nut (3) to 174 Nm (128 ft. lbs.) torque.
12. Perform wheel alignment.
CAUTION: If lower control arm engine cradle bolt is a wheel alignment adjustment bolt (lengthwise grooved shaft (2)), be sure to only tighten
nut. Do not rotate bolt or damage to cradle will occur.
13. Once camber is found to be within specifications, tighten lower control arm cradle bolt nuts to 176 Nm (130 ft. lbs.) torque while holding the bolts
stationary.
14. install belly pan.
Arm - Lower Control - RWD
ARM - LOWER CONTROL - RWD
REMOVAL
1. Raise and support vehicle.
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Remove belly pan.