Magnum V8-5.7L VIN H (2005)
14. Install stabilizer bar bushing retainer halves (1)(2) around bushing (3).
15. Install bolts (2) securing stabilizer bar bushing retainer halves (2) to cradle. Tighten bolts (2) to 60 Nm (44 ft. lbs.) torque.
16. Install stabilizer bar heat shield (3) over stabilizer bar bushing retainer. Install mounting screws (1).
17. Install belly pan.
Arm - Upper Control
ARM - UPPER CONTROL
REMOVAL
1. If removing left upper control arm, remove and reposition coolant recovery container.
2. If removing right upper control arm, remove IPM from mount and reposition.
