Magnum V8-5.7L VIN H (2005)
NOTE: Prior to installation, inspect magnetic encoder (for wheel speed sensor) (2) for any damage and make sure any metal debris sticking to it is
removed.
1. Slide hub and bearing onto knuckle spindle.
2. Install hub nut (1) on end of spindle. Tighten hub nut to 250 Nm (184 ft. lbs.) torque.
3. Install brake rotor, then disc brake caliper and adapter assembly.
NOTE: Install a new dust cap to preserve seal integrity.
4. Install NEW dust cap (2) on hub and bearing.