Magnum V8-5.7L VIN H (2005)
8. Verify that the park lock cable adjustment tab is pulled upward to the unlocked position.
9. Install the wiring harness connectors (2) to the shifter assembly
10. Verify that the shift lever is in the PARK position.
11. Tighten the adjustment screw to 7 Nm (65 inch lbs.).
12. Verify that the key in the LOCK position and the shifter is in PARK.
13. Push downward on the park lock cable adjustment tab to lock the adjustment.
14. Verify correct shifter, park lock, and BTSI operation.
15. If necessary, install the shield, covering the gearshift and park lock cables, to the floorpan and install the bolts to hold the shield to the floorpan.
16. Install any console parts removed for access to shift lever assembly and shift cables.