Magnum SRT-8 V8-6.1L VIN 3 (2006)
Rear Door Window Glass Weatherstrip: Service and Repair
GLASS RUN CHANNEL
REMOVAL
1. Remove the trim panel from the inside of the rear door.
2. Remove the watershield from the inside of the rear door. Refer to Rear Door Panel.
3. Loosen the two screws (1) that secure the rear door glass channel and bracket (2) to the inside of the rear door.
4. Disengage the two screws from the keyed holes near the back of the inner door panel and remove the channel and bracket from the interior of the
rear door.
INSTALLATION
1. Position the rear door glass channel and bracket (2) into the interior of the rear door.
2. Engage the two screws (1) into the keyed holes near the back of the inner door panel.
3. Tighten the two screws that secure the channel and bracket to the inside of the rear door. Tighten the screws to 10 N.m (90 in.lbs.).
4. Reinstall the watershield onto the inside of the rear door.
5. Reinstall the trim panel onto the inside of the rear door.
