Workshop Repair Manuals

Dodge Workshop Manuals

[PREV PAGE] [NEXT PAGE]

dodge Workshop Repair Guides


Magnum SRT-8 V8-6.1L VIN 3 (2006)

Starting and Charging > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair

Page 1
background image

Ignition Switch Lock Cylinder: Service and Repair

CYLINDER-KEY/LOCK

REMOVAL

1. Disconnect the negative battery cable.
2. Remove bezel ignition switch ring.
3. Pull center console bezel loose from instrument panel.

4. Insert ignition key and turn to the "ON" position.
5. Depress the locking tab on the ignition switch housing.
6. Pull the key cylinder from the ignition switch housing.

INSTALLATION

Starting and Charging > Sensors and Switches - Starting and Charging > Ignition Switch > Ignition Switch Lock Cylinder > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]