Workshop Repair Manuals

Dodge Workshop Manuals

[PREV PAGE] [NEXT PAGE]

dodge Workshop Repair Guides


Magnum SRT-8 V8-6.1L VIN 3 (2006)

Wiper and Washer Systems > Check Valve, Washer > Component Information > Service and Repair

Page 1
background image

Check Valve: Service and Repair

CHECK VALVE

REMOVAL

The rear washer check valve is located on the lower liftgate.

1. Disconnect and isolate the battery negative cable.
2. Remove the lower liftgate trim panel.
3. Remove check valve by twisting washer hose at each end.

INSTALLATION

1. Insert check valve into washer hose.
2. Install lower liftgate trim panel.
3. Connect battery negative cable.

Wiper and Washer Systems > Check Valve, Washer > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]