dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Door Window Motor > < Front Door Panel|Service and Repair
Page 1
background image

Front Door Window Glass: Service and Repair

Glass To Regulator

REMOVAL

1.

Remove trim panel and door liner.  See: Front Door Panel/Service and Repair

2.

Raise the door glass until the two (2) nuts align with access holes in the inner door panel.

3.

Remove the two (2) glass plate nuts that hold the door glass to the front window regulator assembly.

4.

Remove the glass through the belt opening, using the notch at the rear of the door to clear the glass fasteners (pull the glass towards the inside of
the vehicle when removing).

 
 
INSTALLATION

1.

Slide the door glass into the door through the belt opening, using the notch at the rear of the door to clear the glass fasteners.

2.

Install the two (2) glass plate nuts that hold the door glass to the front window regulator assembly and tighten finger tight.

3.

To adjust the door glass, raise glass to full up position and secure glass attaching nuts.

3.

Install the door liner and door trim panel.  See: Front Door Panel/Service and Repair

Front Door Window Motor > < Front Door Panel|Service and Repair