Mini Ram Van L4-156 2.6L SOHC VIN G 2-bbl (1984)
spring should not be relieved. If the full load is relieved, the retaining ring will turn too easily and make removal difficult.
c. Remove lock plate, cancelling cam and upper bearing spring, then place turn signal switch in right turn position.
d. Remove screw attaching link between turn signal switch and wiper/washer switch pivot.
e. Remove hazard warning switch knob attaching screw, then the 3 turn signal switch-to-steering column attaching screws.
6. On all models, remove turn signal/hazard warning switch assembly by gently pulling switch up from column while straightening and guiding wires
up through column opening.
7. Reverse procedure to install.
