Mini Ram Van L4-156 2.6L VIN G 2-bbl (1985)
FIGURE 1 - Instrument Panel
4.
Before installing the four (4) upper right hand screws, install a 1/2" O.D. flat washer at each screw location as shown in Figure 1. Install and
tighten screws to 20 inch pounds.
Anytime a panel is removed for any reason and is to be reinstalled, it is recommended that the previous steps be followed.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Refer to Labor Operation Time Schedule for operation and time.
FAILURE CODE:
11 - Broken or Cracked
