Monaco V6-182 3.0L SOHC (1990)
Window Regulator: Service and Repair
REMOVAL
1. Remove door trim panel and water shield.
Door Glass
2. Raise glass so attaching bolts are visible as shown.
3. Remove bolts holding glass to window regulator.
4. Raise glass to up position and secure glass to door frame with masking tape.
5. Remove nuts holding regulator to inner door panel.
6. Remove screws holding regulator gear to inner door panel.
7. Disengage tube from retainer clip.
8. Remove regulator from door.
9. Reverse the above procedure for installation.