dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Paint Anti Chip Film/Front Fender Cap - Repair|Page 9213 > < Paint - Surface Fogging or Whitening|Page 9208
Page 1
background image

Paint: All Technical Service Bulletins
Paint Anti Chip Film/Front Fender Cap - Repair

NO: 23-97-94

GROUP: Body

DATE: Dec. 16, 1994

SUBJECT:
Paint Anti-Chip Film and Front Fender Cap Repair Procedure

MODELS:

1995 (PL) Neon

DISCUSSION:

As a running change, vehicles have been built with paint anti-chip film on several areas of the rocker panels. Also, vehicles may be equipped with front 
fender end caps. The following is a repair procedure for these items.

PARTS REQUIRED:

AR

4783115

Left or Right Front Rocker Panel Anti-Chip Film

AR

4797292

Lower Rocker Panel "Darts" Anti-Chip Film (Pkg. 6)

AR

4783116

Right Front Fender End Cap

AR

4783117

Left Front Fender End Cap

AR

6035204

Retaining Screw (Fender End Cap)

AR

6032031

U-Nut (Fender End Cap)

REPAIR PROCEDURE:

This bulletin involves replacing damaged paint anti-chip film and/or front fender end caps.

1.

Locate the paint anti-chip film to be replaced on the rocker panel (See Illustration).

2.

Starting at one corner and using a heat gun, apply heat and slowly peel back the paint anti-chip film. Remove any residual adhesive using a
commercial remover such as 3M adhesive remover # 08908 or equivalent. Wipe off the panel with a soft cloth saturated with a cleaner such as 3M
adhesive cleaner # 08984 or equivalent.

NOTE:

APPLICATION OF PAINT ANTI-CHIP FILM SHOULD BE DONE WHEN THE AIR AND SURFACE TEMPERATURES ARE BETWEEN 70~
AND 90~ F.

Paint Anti Chip Film/Front Fender Cap - Repair|Page 9213 > < Paint - Surface Fogging or Whitening|Page 9208