Neon L4-2.0L SOHC (1995)
Fuel Gauge Sender: Service and Repair
Fig. 7 Fuel Pump/Level Sensor Electrical Connector
REMOVAL
1. Remove fuel pump module. Refer to procedure.
2. Depress retaining tab and remove the fuel pump/level sensor connector from the bottom of the fuel pump module electrical connector.
Fig. 8 Wire Terminal Locking Wedge
3. Pull off blue locking wedge.
Fig. 9 Wire Terminal Locking Finger
4. Using a small screwdriver lift locking finger away from terminal and push terminal out 6f connector.