Neon L4-2.0L SOHC (1995)
Air Filter Element: Service and Repair
Fig. 1 Air Cleaner
AIR CLEANER
Neon vehicles do not use a heated air inlet system.
-
The PCM adjusts fuel injector pulse width and ignition timing to compensate for different ambient temperatures.
The air cleaner attaches to a bracket on the rear of the cylinder head (Fig. 1). An ambient air duct supplies underhood air for the engine.
FILTER ELEMENT REPLACEMENT
1. Unfasten clasps of front of air cleaner lid. Lift lid off of air cleaner housing.
2. Remove clean air duct from throttle body.
3. Remove make-up air hose.
Fig. 2 Air Cleaner Housing And Element
4. Remove filter element (Fig. 2).
5. If necessary, clean the inside of the air cleaner housing.
6. Install new filter element.
7. Place lid over air cleaner housing. Snap clasps over the air cleaner lid.
8. Install clean air duct to throttle body
CAUTION: DO NOT Over Torque Air Cleaner Housing Cover Clamps.
9. Tighten air cleaner cover clamps to (15-25 in lb).
10. Install make-up air hose.
