Neon L4-2.0L SOHC (1995)
Rollover/Pressure Relief Valve: Service and Repair
Fuel Tank Rollover Valve Replacement
REMOVAL
1. To release fuel tank pressure, remove the fuel filler tube cap.
2. Remove fuel tank. Refer to procedure.
3. Disconnect vapor tube from rollover valve.
4. Using a straight screwdriver, pry the valve out of the grommet in the fuel filler tube.
INSTALLATION
1. Apply a light coating of power steering fluid to the grommet.
2. Install valve in grommet.
3. Attach vapor tube to valve.
4. Install fuel tank. Refer to procedure. See: Fuel Tank/Service and Repair/Fuel Tank Replacement
5. Install fuel filler tube cap.