dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Shift Interlock Cable|Adjustments|Page 5984
Page 1
background image

Shifter A/T: Customer Interest
A/T Gearshift Lever - Buzz Noise on Rough Roads

NO: 21-12-94

GROUP: Transmission

DATE: Jun. 6, 1994

SUBJECT:
Automatic Transmission Gearshift Lever Buzz

MODELS:

1995 (PL) Neon

SYMPTOM/CONDITION:

Buzzing sound coming from the gearshift lever/knob while driving on gravel roads, uneven pavement (tar strips), or washboard surfaces.

DIAGNOSIS:

Verify the condition by driving the vehicle on the same or similar road surfaces.

PARTS REQUIRED:

1

83506385

Gearshift Lever Grease

REPAIR PROCEDURE:

This bulletin involves removing the gearshift knob and liberally applying grease to the gearshift lever.

1.

Loosen the gearshift lever knob set screw and remove the knob from the lever.

2.

Liberally apply approximately 1/2 teaspoon (1 oz.) of Gearshift Lever Grease into the end of the shift lever tube. The grease should fill the space
between the shift rod and the tube.

3.

Install the gearshift knob making sure that it is fully seated and tightened the knob set screw. To prevent stripping the knob set screw do not exceed
20 in. lbs.

4.

Verify that the gearshift assembly is properly functioning.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No:

21-75-13-93

0.2 Hrs.

FAILURE CODE: XX - Service Adjustment

All Technical Service Bulletins: > < Shift Interlock Cable|Adjustments|Page 5984