Neon L4-2.0L VIN C (1998)
Cruise Control Switch: Service and Repair
The speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO AIRBAGS AND SEATBELTS.
REMOVAL
1. Turn off ignition.
2. Remove two screws from side of each switch.
3. Rock switch away from airbag and steering wheel.
4. Disconnect two-way electrical connector.
5. Repeat for the other switch.
INSTALLATION
-
For installation reverse above procedures.
