Neon L4-2.0L VIN C (1998)
5. Align and tighten the catalytic convertor to exhaust manifold ball joint bolts to 27 Nm (20 ft. lbs.) or flex joint attaching nuts (LEV) to 28 Nm
(250 inch lbs.).
Exhaust Clearance
Band Clamp (Torca)
6. Align each component to maintain position and proper clearance with underbody parts and tighten band clamps to specifications.
CAUTION: Band (Torca) clamps should never be tighten such that the two sides of the clamps are bottomed out against the center hourglass
shaped center block. Once this occurs, the clamp has lost its clamping force and must be replaced.
7. Connect the downstream heated oxygen sensor and lower the vehicle.
