Neon L4-2.0L VIN F HO (2003)
7. Remove air cleaner/throttle body assy. (Fig. 188) as follows:
a. Disconnect Proportional Purge Solenoid (PPS) and crankcase vent hose from throttle body.
b. Disconnect the Throttle Position Sensor (TPS) and Idle Air Control (IAC) connectors.
c. Remove mounting bolt and nut (Fig. 188) and partially remove air cleaner assembly.
d. Disconnect accelerator and speed control (if equipped) cables after the assy. is removed from position. Remove air cleaner assembly from
vehicle.
8. Remove battery tray from bracket.
9. Disconnect shifter cable from shift lever and remove from bracket (Fig. 189).
10. Raise vehicle on hoist.