Neon R/T L4-2.0L VIN F HO (2001)
Cruise Control Switch: Service and Repair
REMOVAL
The speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO THE RESTRAINT SYSTEMS.
1. Turn OFF ignition.
2. Remove two screws from side of each switch.
3. Rock switch away from airbag and steering wheel.
4. Disconnect two-way electrical connector.
5. Repeat for the other switch.
INSTALLATION
The speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO THE RESTRAINT SYSTEMS.
1. Install switches.
2. Connect two-way electrical connector.
3. Install two screws to the side of each switch.
4. Install airbag, refer to the Restraint Systems
