Nitro 2WD V6-4.0L (2007)
9. Install new oil filter (2).
10. Lower vehicle.
11. Fill crankcase with specified amount and type of engine oil.
12. Install oil fill cap.
13. Start engine and inspect for leaks.
14. Stop engine and inspect oil level.
OIL FILTER SPECIFICATION
All engines are equipped with a high quality full-flow, disposable type oil filter. When replacing oil filter, use a Mopar(R) filter or equivalent.
USED ENGINE OIL DISPOSAL
Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING above.