Nitro 4WD V6-4.0L (2007)
Console: Service and Repair
Latch - Armrest Lid
Removal
REMOVAL
NOTE: Using a grease pencil or equivalent, mark location of lid latch (2) on the console lid (3) for installation alignment.
1. Remove the two screws (1) attaching the console lid latch (2) to the console lid (3).
2. Remove the lid latch (2) from the console lid (3).
Installation
INSTALLATION
NOTE: Align the lid latch (2) with the reference marks made during removal.
1. Install the two screws (1) attaching the console lid latch (2) to the console lid (3).
2. Check the adjustment of the lid latch (2) and adjust as necessary by loosening the two screws (1) and moving the lid latch (2) right or left as
needed until the console lid (3) closes properly.