Omni L4-135 2.2L SOHC (1984)
FIGURE 1A
5.
1981 Through 1984 Model Year Vehicles Only
Remove the following three wires from the instrument panel side of the bulkhead connector (Figure 1-B).
a.
Yellow wire from cavity #14.
b.
Grey/black wire from cavity #31 (#37 for 1981-1982 model year vehicles), if so equipped.
c.
Dark blue wire from cavity #38.
Install the three wires just removed from bulkhead connector into the 3-way insulator supplied with wiring overlay harness, PN 4304901
(Figure 1-D).
6.
1981 Through 1984 Model Year Vehicles Only
Insert the three bare terminals on overlay harness, PN 4304901, into the bulkhead connector as shown in Figure 1-B and outlined below.