RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
Center Mounted Brake Lamp: Service and Repair
Center High Mounted Stop Lamp (CHMSL) Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the CHMSL from the roof panel.
3. Turn the bulb socket 1/4 turn counterclockwise.
4. Separate the socket from the lamp.
5. Remove the bulb.
INSTALLATION
1. Position the bulb in the socket and press into place.
2. Position the socket in the lamp.
3. Turn the bulb socket 1/4 turn clockwise.
4. Install the CHMSL.
5. Connect the battery negative cable
