RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
1. Using a new gasket, position fuel pump module into opening in fuel tank.
2. Position locknut over top of fuel pump module. Install locknut finger tight.
3. Rotate module until embossed alignment arrow (Fig. 15) points to center alignment mark. This step must be performed to prevent float from
contacting side of fuel tank. Also be sure fitting on fuel filter/fuel pressure regulator is pointed to drivers side of vehicle.
4. Install Special Tool 6856 (Fig. 16) to locknut.
5. Tighten locknut. Refer to Torque Specifications.
6. Install fuel tank. Refer to Fuel Tank Removal/Installation
