RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
Throttle Cable/Linkage: Service and Repair
REMOVAL - 3.7L V-6
CAUTION: Be careful not to damage or kink cable core wire (within cable sheathing) while servicing accelerator pedal or throttle cable.
1. From inside vehicle, hold up accelerator pedal. Remove plastic cable retainer (clip) and throttle cable core wire from upper end of pedal arm (Fig.
1). Plastic cable retainer snaps into top of pedal arm.
2. Remove cable core wire at pedal arm.
Fig.1 Accelerator Pedal Mounting
3. From inside vehicle, remove metal clip holding cable to dashpanel (Fig. 1).
4. Remove air resonator box at throttle body
5. Unsnap cable from dashpanel routing clip.
6. Remove cable housing from dash panel and pull into engine compartment.