RAM 1500 Truck 2WD V6-37L VIN K (2003) - Manifold Pressure/Vacuum Sensor Location
Manifold Pressure/Vacuum Sensor: Service and Repair
REMOVAL
Fig.31 MAP Sensor - 3.7L V-6
Fig.32 MAP Sensor O-Ring - 3.7L/4.7L
The Manifold Absolute Pressure (MAP) sensor is mounted into the front of the intake manifold. An O-ring is used to seal the sensor to the intake
manifold.
1. Disconnect electrical connector at sensor.
2. Clean area around MAP sensor.
3. Remove 2 sensor mounting screws.
4. Remove MAP sensor from intake manifold.
