RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
Fig. 7
6. If necessary, remove the old spring tip liner.
INSTALLATION
1. With the pry bar still inserted between the leaves, install a new spring tip liner onto the leaf.
Fig. 8
2. Firmly seat the spring tip liner onto the leaf. A C-Clamp can be used to compress the adjacent leaves together which will seat the liner retaining
pin into the hole.
NOTE: THE SPRING TIP LINER IS PROPERLY INSTALLED WHEN THE RETAINING PIN IS POINTING TOWARD THE PAVEMENT
AND THE WEAR PAD IS CONTACTING THE LEAF SPRING.
3. Apply a small amount of lubricant oil onto the tip liner wear pad.
4. Install all the spring tip liners.