RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
Drive/Propeller Shaft: Service and Repair
Removal and Installation
REAR PROPELLER SHAFT
REMOVAL
1. Shift transmission into Neutral.
2. Raise and support vehicle.
3. Mark a line across the pinion companion flange and propeller shaft flange yoke (Fig. 11) for installation reference.
4. Mark the outline of the center bearing (Fig. 12) on the crossmember for installation reference, if equipped.
5. Remove center bearing mounting nuts, if equipped.
6. Remove pinion yoke companion flange bolts.
