RAM 1500 Truck 2WD V8-4.7L (2008)
Blower Motor: Service and Repair
Installation
INSTALLATION
1. Position the blower motor (2) into the bottom of the HVAC housing (5).
2. Install the three screws (4) that secure the blower motor to the HVAC housing. Tighten the screws to 1.7 Nm (15 in. lbs.).
3. Connect the HVAC wire harness lead (1) to the blower motor and install the wire harness lead into the two wire harness retainers (3).
4. Install the passenger side cowl trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim/Cowl Trim -
Installation .
5. Reconnect the negative battery cable.