RAM 1500 Truck 2WD V8-4.7L (2008)
Shift Solenoid Position Sensor/Switch: Service and Repair
Removal
REMOVAL
NOTE: If the Transmission Solenoid/TRS Assembly is being replaced, the Quick Learn Procedure must be performed. See: Testing and
Inspection/Programming and Relearning/Transmission Control Module/TCM Quick Learn
1. Remove the valve body from the transmission. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/545RFE Automatic Transmission/Removal
2. Remove the bolts (1) holding the transmission solenoid/TRS assembly onto the valve body.
3. Separate the transmission solenoid/TRS assembly from the valve body.