RAM 1500 Truck 2WD V8-5.9L VIN Z LDC (1999)
4. Install and tighten the two screws that secure the CTM to the mounting bracket on the inboard side of instrument panel steering column opening.
Tighten the screws to 1.6 Nm (15 in lbs).
5. Install the steering column opening cover onto the instrument panel. Refer to Steering Column Opening Cover in the Replacement for the
procedures.
6. Reconnect the battery negative cable.
NOTE: If a new high-line Central Timer Module is installed, the programmable features must be enabled and/or disabled to the customer's
preferred settings. Use a DRB scan tool and the proper Diagnostic Procedures to perform these operations.
