RAM 1500 Truck 2WD V8-5.9L VIN Z LDC (1999)
Window Regulator: Service and Repair
REMOVAL
1. Remove door trim panel.
2. Remove water dam.
3. Remove nuts attaching door glass to window regulator.
4. Remove glass from door or move glass to full up position and secure glass to door with tape.
5. Disengage power window motor wire connector from door harness, if equipped.
6. Remove bolts attaching window regulator to inner door panel.
Door Glass Window Regulator
7. Separate window regulator from door panel.
8. Extract window regulator through access hole in inner door panel.
INSTALLATION
1. Position window regulator in door through access hole.
2. Install bolts attaching window regulator to inner door panel.
3. Engage power window motor wire connector to door harness, if equipped.
4. Install glass in lift plate.
5. Install water dam.
6. Install door trim panel.
