RAM 1500 Truck 2WD V8-5.9L VIN Z LDC (1999)
Wiper Blade: Service and Repair
Wiper Blade Remove/Install - Typical
NOTE: The notched retainer end of the wiper element should always be oriented towards the end of the wiper blade that is nearest to the wiper pivot.
REMOVAL AND INSTALLATION
1. Turn the windshield wiper switch to the On position. By turning the ignition switch to the On and Off positions, cycle the wiper blades to a
convenient working location on the windshield.
2. Lift the wiper arm to raise the wiper blade and element off of the windshield glass.
3. To remove the wiper blade from the wiper arm, push the release tab under the arm tip and slide the blade away from the tip towards the pivot end
of the arm.
4. To install the wiper blade on the wiper arm, slide the blade retainer into the U-shaped formation on the tip of the wiper arm until the release tab
snaps into its locked position. Be certain that the notched retainer for the wiper element is oriented towards the end of the wiper blade that is
nearest to the wiper pivot.