RAM 1500 Truck 2WD V8-5.9L VIN Z LDC (1999)
7. Remove the cowl plenum cover/grille panel from the vehicle and set it aside.
Wiper Module Remove/Install
8. Remove the four screws that secure the wiper module to the cowl plenum panel.
9. Move the wiper module as required to access the wiper motor wire harness connector.
Wiper Motor Connectors
10. Unplug the wiper motor wire harness connectors from the wiper motor.
11. Remove the wiper module from the cowl plenum.
12. Reverse the removal procedures to install. Be certain that the washer nozzle hoses are correctly routed and installed in the retainers on the
underside of the cowl plenum cover/grille panel. Tighten the mounting screws to 8 Nm (72 in lbs).