RAM 1500 Truck 4WD V6-3.7L VIN K (2002)
Clutch: Service and Repair
Input Clutch
Disassembly
45RFE - AUTOMATIC TRANSMISSION
INPUT CLUTCH / DISASSEMBLY
1. Remove the reverse reaction plate selective snap-ring from the input clutch retainer (Fig. 79).
2. Remove the reverse reaction plate from the input clutch retainer.
3. Remove the reverse hub and reverse clutch pack from the input clutch retainer.
4. Remove the number 4 bearing from the overdrive hub.
5. Remove the overdrive hub from the input clutch retainer (Fig. 79).
6. Remove the number 3 bearing from the underdrive hub.
7. Remove the OD/reverse reaction plate snapring from the input clutch retainer.
8. Remove the underdrive hub, overdrive clutch, and overdrive reaction plate from the input clutch retainer (Fig. 79).
NOTE: The overdrive friction discs and steel discs are thicker than the matching components in the underdrive and reverse clutches.
9. Remove the number 2 bearing from the input clutch hub.
10. Remove the overdrive clutch wave snap-ring from the input clutch retainer.
11. Remove the UD/OD reaction plate tapered snap-ring from the input clutch retainer.