RAM 1500 Truck 4WD V8-4.7L (2008)
1. Raise and support the vehicle.
2. Lockout the parking brake cable.
3. Loosen cable adjuster nut.
4. Remove the rear park brake cable from the intermediate park brake cable.
5. Compress tabs on cable end fitting on the rear park brake cable to the frame mount bracket. Then pull the cable through the bracket.
6. Disengage the park brake cable (1) from behind the rotor assembly.
7. Compress cable tabs (3) on each cable end fitting at the brake cable support plate.
8. Remove the cables (4) from the brake cable support plates.