RAM 1500 Truck 4WD V8-4.7L (2008)
NOTE: Illustration shown with center front seat removed for clarity.
1. If removed, install the rear duct (2) onto the rear outlet (4). Make sure the duct is fully engaged to the outlet.
2. Install the three push-pin retainers (1) that secure the rear duct to the front seat support (3) and install the front seat See: Body and
Frame/Seats/Service and Repair/Seat - Installation .
NOTE: Illustration shown with seat cushions removed for clarity.
3. Install the floor console duct (1) onto the floor distribution duct (4) located at the bottom of the HVAC housing (5). Make sure the ducts are fully
engaged to each other.
4. Slide the rear duct adapter (3) forward and install the floor console duct onto the rear duct (2). Make sure the ducts are fully engaged to each other.
5. Install the floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console - Installation .