RAM 1500 Truck 4WD V8-4.7L (2008)
Air Register: Service and Repair
Air Outlets - Installation
Front Passenger Air Outlet
INSTALLATION-FRONT PASSENGER AIR OUTLET
1. Position the passenger side instrument panel air outlet and demister air outlet assembly (2) onto the back of the instrument panel cover (3).
CAUTION: Always use the retaining screws supplied with the replacement air outlet. Do not use screws longer then 10 mm. Failure to
follow this caution may result in damage to the instrument panel cover.
CAUTION: Use care when installing the air outlet retaining screws. To prevent damage to the instrument panel cover, do not overtighten the
screws.
2. Install six M 4.2 x 9.5 mm screws (1) to secure the air outlet assembly to the instrument panel cover. Carefully tighten the screws securely.
3. Install the instrument panel cover.
4. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation .
Rear Seat Air Outlets
INSTALLATION-REAR SEAT AIR OUTLETS
NOTE: The air outlets are retained into the air outlet housing by eight retaining tabs. The air outlets must be first installed onto the bottom set
of retaining tabs, then the upper set of tabs can be engaged.
1. Position the rear air outlets (1) to the back of the rear air outlet housing (2) and engage the lower set of retaining tabs (3).
2. Gently engage the upper set of retaining tabs (4). Make sure all of the retaining tabs are fully seated.