RAM 1500 Truck 4WD V8-4.7L (2008)
NOTE: The pulley and bearing assembly can be removed from the compressor by hand or, if required, with a two jaw puller.
10. Remove the pulley and bearing assembly (1) from the front of the A/C compressor (2). If required, install a two jaw puller (3) and turn the puller
center-bolt clockwise until the pulley and bearing assembly is completely removed.
11. Remove the plastic retaining clip (1) and the screw (2) that secures the clutch field coil wire lead and connector (3) to the A/C compressor (4).
12. Using compressor field coil remover (Special Tool 9354 in Kit 9349) (1) and a two jaw puller (2), remove the clutch field coil (3) from the front
of the A/C compressor (4).
Denso A/C Compressor
DENSO A/C COMPRESSOR