RAM 1500 Truck 4WD V8-4.7L (2008)
Power Distribution Module: Description and Operation
Operation
OPERATION
All of the current from the battery and the generator output enters the Totally Integrated Power Module (TIPM) via a stud on the top of the module. The
TIPM cover is removed to access the fuses or relays. Internal connections of all of the power distribution center circuits is accomplished by a
combination of bus bars and a printed circuit board.
For a complete wiring diagram Refer to Diagrams/Electrical.
The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector
pin-out information and location views for the various wire harness connectors, splices and grounds.