RAM 1500 Truck 4WD V8-4.7L (2008)
EGR Cooler: Removal and Replacement
P/U
P/U
WARNING: Locking constant tension hose clamps are used on the EGR cooler system hoses. When removing, use only tools designed for
servicing this type of clamp. Always wear safety glasses when servicing locking constant tension clamps.
1. Remove engine cover (1).
2. Drain cooling system below level of EGR cooler See: Engine, Cooling and Exhaust/Cooling System/Service and Repair .
3. Disconnect EGR bypass control electrical connector (1).
4. Remove EGR bypass control assembly mounting bolts (2) and position aside.
5. Remove air transfer tube assembly heat shield.
