RAM 1500 Truck 4WD V8-4.7L (2008)
1. Install the wheel speed sensor bracket (3) to the upper ball joint (2).
2. Screw the upper ball joint (2) into the steering knuckle. Tighten to 400 Nm (295 ft.lbs.).
3. Reconnect the wheel speed sensor wire into the bracket (3).
4. Install the upper ball joint mounting nut. Tighten to 200 Nm (148 ft.lbs.)
5. Remove the support from the steering knuckle.
6. Install the tire and wheel assembly.