RAM 1500 Truck 4WD V8-4.7L (2008)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Spring - Installation
4X4-Coil Over - Independent Front Suspension
4X4-COIL OVER
1. Position the shock (1) into the coil spring (3).
2. Install the upper isolator (2).
3. Install the upper shock mounting plate (2).
4. Install the shock upper mounting nut.
5. Install shock wrench 9362 (1) (on end of a torque wrench), on shock shaft retaining nut. Next, insert 8 mm socket though Wrench onto hex located
on end of shock shaft. While holding shock shaft from turning, tighten nut using Wrench to 90 Nm (66 ft. lbs.) torque.
