RAM 1500 Truck 4WD V8-4.7L (2008)
INSTALLATION
1. Wipe the axle tube bore clean. Remove any old sealer or burrs from the tube.
2. Coat the lip of the new seal with axle lubricant and install a seal with Installer C-4076-B and Handle C-4735.
NOTE: When tool contacts the axle tube, the seal is installed to the correct depth.
3. Install the axle shaft (1).
4. Install differential cover and fill with gear lubricant to the bottom of the fill plug hole.
Removal
REMOVAL
1. Mark universal joint, companion flange and pinion shaft for installation reference.
2. Remove propeller shaft from the companion flange.
3. Remove the brake rotors to prevent any drag.
4. Rotate companion flange three or four times.
5. Record pinion torque to rotating (1) with an inch pound torque wrench (2).
